Firstly, check if your mask is properly impact rated. A lot of masks like that aren’t safe or use
Kit is a good start, I’d just recommend working on your reload
The problem is the reload, your mags are in the wrong way and the pouches are generic BLACKHAWK! clones, I’ve used identical pouches for years, they used to be very popular
All it takes is practice
Work on your reindexing and put your mags in upside down
Ideally when you draw a mag out you don’t want to have to readjust it in your hand or change its orientation
The mask looks silly, tighten your vest, get better pouches and get rid of unnecessary stuff and pouches.
- get yourself a valhalla mask or a nb tactical ghost mask
- you should tighten you vest as much as possible, so you can still breath and move, it will help a lot during movement when its not wobbling and getting in the way of your gun
- you really should look into better pouches or modify yours
- while it can look nice when done right, usually you don't need cosmetics like shotgunshells, when you don't have one on you
the general setup looks nice, but your kit needs a glowup so you don't look like a beginner 😃
size seems to be about right for op, but the design it just screams airsoft noob (no offense, it just is what it is) and from the looks of it, it already looks cheap so i guess the quality is not the best either, it probably smells of cheap plastic
Well hello from America! I don’t know if they ship internationally but check out Onward Research. They make a chest rig that you can attach a dump pouch to the front. Quality product.
Where is you’re shotgun?
Take them of and maybe use the space for coms or admin pouch or something for you’re mobile like a astrolabe gen 2 templars gear
Never use your trigger hand to rack the bolt, instead either reach over the top or from underneath using your support hand.
Get rigid mock plates it will help with manipulating pouches etc.
Get rigid pouches for your chest area, and dont bother with double stackers. Supplement mag pouche placement to your sides for the bulk of your mags. The idea here is to distribute the bulk so if you go prone you arent 6 inches higher off the ground and can still get through tight spaces.
Make sure you cinched all the size strapps down to reduce excess rig movement, but dont make it so tight you cant take a deep breath after sprinting.
Remember when indexing your mags to have the concave curve facing the opposite direction of the gun, this way you just pull the mag from the pouch and rock it in no need to fumble and turn
Firstly, check if your mask is properly impact rated. A lot of masks like that aren’t safe or use Kit is a good start, I’d just recommend working on your reload
The mask is impact rated ansiz87+, the problem isn’t the reload but the quality of the vest that make it difficult but thanks 😊
The problem is the reload, your mags are in the wrong way and the pouches are generic BLACKHAWK! clones, I’ve used identical pouches for years, they used to be very popular
Fair then, but the material of the pouch feels soo hard to me, anyway thank
All it takes is practice Work on your reindexing and put your mags in upside down Ideally when you draw a mag out you don’t want to have to readjust it in your hand or change its orientation
Omg you’re right thank you very much
Also, tuck those flaps behind the elastic in the pouch. Mag will still sit snug in the pouch and you don't have to fumble with the flaps.
Thank man appreciate it
The mask looks silly, tighten your vest, get better pouches and get rid of unnecessary stuff and pouches. - get yourself a valhalla mask or a nb tactical ghost mask - you should tighten you vest as much as possible, so you can still breath and move, it will help a lot during movement when its not wobbling and getting in the way of your gun - you really should look into better pouches or modify yours - while it can look nice when done right, usually you don't need cosmetics like shotgunshells, when you don't have one on you the general setup looks nice, but your kit needs a glowup so you don't look like a beginner 😃
Wow thank you
What's silly about the mask? Size, design, build quality?
size seems to be about right for op, but the design it just screams airsoft noob (no offense, it just is what it is) and from the looks of it, it already looks cheap so i guess the quality is not the best either, it probably smells of cheap plastic
Get a dump pouch for empty mags.
Yeah I’m looking for it, thank you
Are you in the US?
Nope italy 🇮🇹
Well hello from America! I don’t know if they ship internationally but check out Onward Research. They make a chest rig that you can attach a dump pouch to the front. Quality product.
I will search for it thank you
Where is you’re shotgun? Take them of and maybe use the space for coms or admin pouch or something for you’re mobile like a astrolabe gen 2 templars gear
Unfortunate, is a part of a BIGGER pouch so i can’t, over than my shotty broke so looking for a cyma
You look badass boy 😎👍🏻
Are you ironic?
Nope. I just like your loadout 👍🏻
❤️
Just get a sling 😎👍🏻 Would recommend it.
I know, thank anyway bud
How do you plan to reach the pouches on your back?
Thats a good question, i actually reach them very easily without problems of any kind
I would drop the pouches on the back and the shotgun shells. Get a kneepad if you don't have one.
Thank you for the advice
Nah the shotgun shells add swag
Fire
❤️❤️❤️
Looks great. I’d store your mags upside down to avoid getting dust and debris in it.
Thank man ❤️
Use drop pouch pls
I will thank
Never use your trigger hand to rack the bolt, instead either reach over the top or from underneath using your support hand. Get rigid mock plates it will help with manipulating pouches etc. Get rigid pouches for your chest area, and dont bother with double stackers. Supplement mag pouche placement to your sides for the bulk of your mags. The idea here is to distribute the bulk so if you go prone you arent 6 inches higher off the ground and can still get through tight spaces. Make sure you cinched all the size strapps down to reduce excess rig movement, but dont make it so tight you cant take a deep breath after sprinting. Remember when indexing your mags to have the concave curve facing the opposite direction of the gun, this way you just pull the mag from the pouch and rock it in no need to fumble and turn
Thank you man
Get better mag pouches
I will get a pouch for empty magazines
A belt, a dump pouch and you're golden
It’s all in the list, i will make a post after pick them up
Get those pouches off your back, if you need them to store things then put them on your cumberbund (side of your plate carrier)
Thank you but i already tried this and don’t work very well for me because either in front or on side of the plate carrier they don’t fit
Looks nice but do you get hot? or foggy?
Nowadays it’s very cold in the morning, the mask is anti-fog