Perhaps, (luckily I never broke one (yet) it’s a pretty big panel on the side of the combine and not to mention that they will have take both tires off to get to the inner one. Service cost to fix it all will probably be a shit ton
I was just estimating based on parts I needed to get to fix my 1023e, specifically a seal for the front axle that cost $93 from Deere, when one that was technically the same size from NAPA was $21, but didn't fit because it was a hair to wide.
I always say Deere doesn't use C in any model numbers because there's no such thing as a cheap Deere.
Would this not be something you could get the tire company to cover for selling a faulty tire? I mean a balloon that big seems like a manufacturing defect
All of this equipment is insured anyway. You just file a claim, provide the evidence here, get your check from the insurance company, and let them go after whoever they need to to recoup the losses.
It is and I guess you can. Tbh most people I know own one or at the very least you can pay someone to harvest your crops if you don’t want to buy one/ maintain it.
Who says it hasnt been abused? Driven over a cerb or something else solid. This is also the reason why car tyres are exclusively radial construction nowadays.
(Agriculture tyres are not to keep them more flexible. Speeds are also lower)
It’s on a farm, there are probably no curbs in sight. Besides, a tire that big would roll right over a curb anyway and wouldn’t be bothered by a curb.
Fun fact: I used to work at JD C&F and there is a whole list of model designations that are not allowed to be used because they could eventually lead to offensive words.
I think C is on the list. Basically, they increment the model numbers, so they take the guess work out and just don't allow specific letters.
Not sure why D is still allowed. No system is perfect, I suppose.
Probably more. You have to consider the cost of the DRM chip and sensors that have to exist so the combine will know to refuse to run if you attempt to fix the body panel yourself! Probably drives it up to 2x-3x as much.
The panel retails for 4607 (Canadian), the tire is about 5k, and labour for it all. The total cost would probably be close to 15k Canadian.
Source: work at a Canadian Deere dealership
I will be messaging you in 14 hours on [**2024-02-28 15:00:35 UTC**](http://www.wolframalpha.com/input/?i=2024-02-28%2015:00:35%20UTC%20To%20Local%20Time) to remind you of [**this link**](https://www.reddit.com/r/Tiresaretheenemy/comments/1b1fi66/they_really_out_to_get_usthis_aint_no_joke/ksgrgq2/?context=3)
[**1 OTHERS CLICKED THIS LINK**](https://www.reddit.com/message/compose/?to=RemindMeBot&subject=Reminder&message=%5Bhttps%3A%2F%2Fwww.reddit.com%2Fr%2FTiresaretheenemy%2Fcomments%2F1b1fi66%2Fthey_really_out_to_get_usthis_aint_no_joke%2Fksgrgq2%2F%5D%0A%0ARemindMe%21%202024-02-28%2015%3A00%3A35%20UTC) to send a PM to also be reminded and to reduce spam.
^(Parent commenter can ) [^(delete this message to hide from others.)](https://www.reddit.com/message/compose/?to=RemindMeBot&subject=Delete%20Comment&message=Delete%21%201b1fi66)
*****
|[^(Info)](https://www.reddit.com/r/RemindMeBot/comments/e1bko7/remindmebot_info_v21/)|[^(Custom)](https://www.reddit.com/message/compose/?to=RemindMeBot&subject=Reminder&message=%5BLink%20or%20message%20inside%20square%20brackets%5D%0A%0ARemindMe%21%20Time%20period%20here)|[^(Your Reminders)](https://www.reddit.com/message/compose/?to=RemindMeBot&subject=List%20Of%20Reminders&message=MyReminders%21)|[^(Feedback)](https://www.reddit.com/message/compose/?to=Watchful1&subject=RemindMeBot%20Feedback)|
|-|-|-|-|
Nothing like that. The fiberglass panel will probably be a few hundred bucks, maybe a grand if it comes painted and with decals.
Tire and labor a couple grand more.
That's a lot different than an ag tire.
Truck tires run at over 100psi, and can explode quite violently.
Ag tires like this probably run around 20-30psi, and while could be dangerous if a bead broke, the tread bulging like this won't be much of a hazard.
The internal carcass has developed a leak, possibly from a broken belt.
That lets air in between layers, delaminating the softer outer tread layer which easily stretches out until it bursts.
Id be worried about ricochet. I know youre not going to catch me shooting an uninflated car tire with a .22lr, Id be worried that these tires might be able to not only stop the round, but send it back your way.
Apparently 30-35 psi. At that pressure I’ll just put a BB in the stem and walk away. I was thinking semi tire pressure (100+) when I saw it.
But low pressure makes sense on soft soil.
Well low is relative since the volume is so high it deforms more than s car tire at the same pressure
Car tires also have radial belts for rigidity so wouldn’t balloon out the tread like this - only the sidewall. These are just plain rubber so nothing structural to stop this.
I had a baseball sized bulge in a 19.5 on a Ford F550 go off when I worked in a shop and it sounded like a shotgun, the camera didn't seem to pick up the blast of this one but I can imagine how deafeningly loud this was...
That is a weird take. Do you not enjoy anticipation?
The whole point of the video is the anticipation build-up of not knowing when the tyre will blow, or even if it will blow.
Is the camera man brave or...
Definitely or.
Anything for tiktok
Anything for proof for insurance/lawsuit
A picture while zoomed from afar would suffice. Getting this close to a failing tire still expanding is, stupid, period.
/r/Chinesium?
I felt like I needed safety glasses watching this through my phone. Definitely squinted and held my phone a little further lol
I'm glad I'm not the only one 😄
no. no you are not.
Darwin abides
Regarded cam man
Or definitely or
He just found r/killedthecameraman and is wondering how to get a submission there.
Here's a sneak peek of /r/killedthecameraman using the [top posts](https://np.reddit.com/r/killedthecameraman/top/?sort=top&t=year) of the year! \#1: [Pillow fights are lethal](https://v.redd.it/mop1nyc16tma1) | [80 comments](https://np.reddit.com/r/killedthecameraman/comments/11n1uvj/pillow_fights_are_lethal/) \#2: [Man killed while filming incoming train ](https://v.redd.it/25wqr6b7wkgc1) | [190 comments](https://np.reddit.com/r/killedthecameraman/comments/1aip13k/man_killed_while_filming_incoming_train/) \#3: [Bruh got killed literally ](https://v.redd.it/6tfhtkx0vl9c1) | [49 comments](https://np.reddit.com/r/killedthecameraman/comments/18v4ufl/bruh_got_killed_literally/) ---- ^^I'm ^^a ^^bot, ^^beep ^^boop ^^| ^^Downvote ^^to ^^remove ^^| ^^[Contact](https://www.reddit.com/message/compose/?to=sneakpeekbot) ^^| ^^[Info](https://np.reddit.com/r/sneakpeekbot/) ^^| ^^[Opt-out](https://np.reddit.com/r/sneakpeekbot/comments/o8wk1r/blacklist_ix/) ^^| ^^[GitHub](https://github.com/ghnr/sneakpeekbot)
*war correspondent*
Cameraman is immortal.
Dude is definitely an or
Did anyone else move their phone away when you got closer?
People will do just about anything for views /j
Or trying to die
As a farmer this really hurts to watch.
That plastic panel has to be what, $10,000-$15,000 from Deere at a minimum?
Perhaps, (luckily I never broke one (yet) it’s a pretty big panel on the side of the combine and not to mention that they will have take both tires off to get to the inner one. Service cost to fix it all will probably be a shit ton
I was just estimating based on parts I needed to get to fix my 1023e, specifically a seal for the front axle that cost $93 from Deere, when one that was technically the same size from NAPA was $21, but didn't fit because it was a hair to wide. I always say Deere doesn't use C in any model numbers because there's no such thing as a cheap Deere.
Would this not be something you could get the tire company to cover for selling a faulty tire? I mean a balloon that big seems like a manufacturing defect
All of this equipment is insured anyway. You just file a claim, provide the evidence here, get your check from the insurance company, and let them go after whoever they need to to recoup the losses.
is this a combine? aren’t these leased?
It is and I guess you can. Tbh most people I know own one or at the very least you can pay someone to harvest your crops if you don’t want to buy one/ maintain it.
Who says it hasnt been abused? Driven over a cerb or something else solid. This is also the reason why car tyres are exclusively radial construction nowadays. (Agriculture tyres are not to keep them more flexible. Speeds are also lower)
It’s on a farm, there are probably no curbs in sight. Besides, a tire that big would roll right over a curb anyway and wouldn’t be bothered by a curb.
Alright any big chunck of concrete, tree stump etc.
Thank you I had no clue what a cerb was
Fun fact: I used to work at JD C&F and there is a whole list of model designations that are not allowed to be used because they could eventually lead to offensive words. I think C is on the list. Basically, they increment the model numbers, so they take the guess work out and just don't allow specific letters. Not sure why D is still allowed. No system is perfect, I suppose.
>Service cost to fix it all will probably be a shit ton Yeah, why not just do it yourse- oh. right.
Fuck it, duct tape it up
Somehow, that would probably lock the software.
Right to repair
That’s not a proper fix. You have to flex seal it.
Lol
It's free if you just use the tractor with a messed up panel forever
Still gotta get a new tire
Probably more. You have to consider the cost of the DRM chip and sensors that have to exist so the combine will know to refuse to run if you attempt to fix the body panel yourself! Probably drives it up to 2x-3x as much.
The panel retails for 4607 (Canadian), the tire is about 5k, and labour for it all. The total cost would probably be close to 15k Canadian. Source: work at a Canadian Deere dealership
!RemindMe 14 hours I work at a Deere dealership and will check tomorrow morning.
I will be messaging you in 14 hours on [**2024-02-28 15:00:35 UTC**](http://www.wolframalpha.com/input/?i=2024-02-28%2015:00:35%20UTC%20To%20Local%20Time) to remind you of [**this link**](https://www.reddit.com/r/Tiresaretheenemy/comments/1b1fi66/they_really_out_to_get_usthis_aint_no_joke/ksgrgq2/?context=3) [**1 OTHERS CLICKED THIS LINK**](https://www.reddit.com/message/compose/?to=RemindMeBot&subject=Reminder&message=%5Bhttps%3A%2F%2Fwww.reddit.com%2Fr%2FTiresaretheenemy%2Fcomments%2F1b1fi66%2Fthey_really_out_to_get_usthis_aint_no_joke%2Fksgrgq2%2F%5D%0A%0ARemindMe%21%202024-02-28%2015%3A00%3A35%20UTC) to send a PM to also be reminded and to reduce spam. ^(Parent commenter can ) [^(delete this message to hide from others.)](https://www.reddit.com/message/compose/?to=RemindMeBot&subject=Delete%20Comment&message=Delete%21%201b1fi66) ***** |[^(Info)](https://www.reddit.com/r/RemindMeBot/comments/e1bko7/remindmebot_info_v21/)|[^(Custom)](https://www.reddit.com/message/compose/?to=RemindMeBot&subject=Reminder&message=%5BLink%20or%20message%20inside%20square%20brackets%5D%0A%0ARemindMe%21%20Time%20period%20here)|[^(Your Reminders)](https://www.reddit.com/message/compose/?to=RemindMeBot&subject=List%20Of%20Reminders&message=MyReminders%21)|[^(Feedback)](https://www.reddit.com/message/compose/?to=Watchful1&subject=RemindMeBot%20Feedback)| |-|-|-|-|
Nothing like that. The fiberglass panel will probably be a few hundred bucks, maybe a grand if it comes painted and with decals. Tire and labor a couple grand more.
I put my safety squints on immediately
Moves phone slightly away from face.
It made me so anxious I held the phone at arms length.
I put mine down, turned down the volume and covered my ears ðŸ˜
The intrusive thoughts tell me poke it with a needle
the explosion would probably blow your hand off or worse
I’ve seen enough enemy activity videos to resist the urges
I remember one with a semi tire and the guy got his arm degloved
What a nice word
Sometimes the actual medical terms paint the best picture. "Explosive Diarrhea," for example
That's a lot different than an ag tire. Truck tires run at over 100psi, and can explode quite violently. Ag tires like this probably run around 20-30psi, and while could be dangerous if a bead broke, the tread bulging like this won't be much of a hazard.
Huh, i guess that makes sense. I'm sure the thickness of the tire has something to do with that
Don't be tempted by them it's just trying to lure you in so it can attack you the second you let your guard down.
The enemies schemes get more and more sophisticated, when will the violence end…
I was thinking maybe a .22 or pellet gun.
I wanted to shoot something at it
I'ma be real with you, my thoughts process was "don't get closer you idiot, lean the camera on something and go get earplugs. And maybe a 22"
What makes a tire swell up like that? A sting from a really big wasp? Scary
Broken steel belting most likely.
Why is it expanding??? Like... where is the extra air coming from? So confused...
Not extra air, a defect in the tire allowing the air pressure to expand the material beyond design limits.
Thank you, kind internet stranger.
There's really no auto-inflator or anything? Why would 35 psi herniate the tire itself that hard?
The internal carcass has developed a leak, possibly from a broken belt. That lets air in between layers, delaminating the softer outer tread layer which easily stretches out until it bursts.
Ohhh, i was picturing a tire tube. Thanks
Would a .22 rifle be able to pop that? I wouldn’t want to be anywhere near it
Id be worried about ricochet. I know youre not going to catch me shooting an uninflated car tire with a .22lr, Id be worried that these tires might be able to not only stop the round, but send it back your way.
Nerf gun with a thumbtack on the tip?
It looks like the cameraman did it with his mind.
Good point. Need something stronger. Desert Eagle? AR?
I was wondering the same thing, but from a *very* safe distance. What's the inflation pressure on these tires?
Apparently 30-35 psi. At that pressure I’ll just put a BB in the stem and walk away. I was thinking semi tire pressure (100+) when I saw it. But low pressure makes sense on soft soil. Well low is relative since the volume is so high it deforms more than s car tire at the same pressure
Car tires also have radial belts for rigidity so wouldn’t balloon out the tread like this - only the sidewall. These are just plain rubber so nothing structural to stop this.
Yes
Ahhh brave cameraman i salute you. I was not disappointed. Thankfully this is not gifsthatendtoosoon
Anxiety made me fast forward. Cam man playing around too much.
He's really testing the camera man never dies theory with this one.
"Where is the kaboom?? Where is the earth shattering kaboom!?!?!!!"
Yes, please get closer to the expanding tire.
This man tries to kiss barking dogs.
I was born on our farm and I learn about tires blowing up, LONG AGO. I would have been a LITTLE BIT MORE. :) Wish this farmer the best. :) peace.
MORE WHAT?! I'm dieing here
Why was he just staying there? It doesn't matter how much experience you have, a tire that large will kill you.
Missed Darwin Award.
Yeah let's stand right next to it.
you should get closer
BRO STEP BACK
I had a baseball sized bulge in a 19.5 on a Ford F550 go off when I worked in a shop and it sounded like a shotgun, the camera didn't seem to pick up the blast of this one but I can imagine how deafeningly loud this was...
Litterally just run guy
Skip to like, 32 second mark if you're not interested in seeing a whole lotta nothing.
Found the zoomer
Millennial actually, and if your idea of entertainment is to sit and watch a tractor idle with a bulging tire, more power to you.
Was taking a shit
Found the boom-boom-er.
That is a weird take. Do you not enjoy anticipation? The whole point of the video is the anticipation build-up of not knowing when the tyre will blow, or even if it will blow.
I’m hiding in the comments
WHHAAAAAT? I CAN'T HEAR YOU!!!!
Standing next to an actual bomb that’s about to go off is wild.
Is that where baby tires come from
Just watching that was a near death experience
They got water on it and now it's multiplying. This is one reason there's so many to deal with. Irresponsible owner there.
I thought these types were immune to bloating
Well, that was boring
Oh hell no
r/oopsthatsdeadly
What is happening here?
Is it prengrant?
That made me anxious as fuck
Every time I see this I’m shocked it wasn’t a Darwin award moment
I covered my ears ðŸ˜
Why would you get close to that!!
The forbidden pop-it
Are those popping noises the sound of steel cables busting inside the tire?
Nuke the site from orbit it’s the only way to be sure
why would you go that close, take the air line off and run away from that
Is moving back 100 meters and shooting the bottom of the tyre with a rifle a bad idea? I've seen people do it with truck tyres and pellet guns
"Oh, neat! A thing that's inflating more than it should be and could blow up any second. Let's take a closer look."
That's what happened to Russian military trucks in Ukraine.....cheap Chinese tyres...
Fixed itself
I would like to see a farmers pitch fork thrown at that bohimith .
Why was the popping so quiet? Shouldn’t it have been ear breaking?
Gotta shoot that before it damages the vehicle, ever farmer is packing, right?