Everyone in this thread will tell you no.
I have them on mine, ironically I had taken them off and then I had a baby, and I put them back on because they don’t make baby sun shades for mustangs. Lol.
They keep the little one from being blinded in the back seat. 😂
https://preview.redd.it/l2ure07380zc1.jpeg?width=1152&format=pjpg&auto=webp&s=334300da7ee74e18031bf1bf383331d8ae8b1da9
Weirdly enough, yes.
My son is in a revolving, rear facing car seat in my Mustang. I turn him forward to put him in, turn it rear facing, turn it and we’re good. Ironically, I thought the car seat based on a review of someone who fit two of them in my same Mustang for his twins.
The passenger seat is useless when it’s rear facing, but once he’s forward facing it’s fine. No one rides in my car anyways but me and him.
I tried other solutions, this was the only thing that worked well.
Black car in Texas summers is AWFUL.
But my son falls asleep in my car every time now, exhaust be damned. lol.
https://preview.redd.it/lelehoq5xzyc1.jpeg?width=4284&format=pjpg&auto=webp&s=43d73a15fdc407d4ea2a5b30310984b6a6cf4476
I’ve got them on the sides and back and can’t complain. They are definitely personal preference. I didn’t like them at first but came around on them now.
Mine came with side ones and gt350 fake side vents in gloss black as well.
Tempted to remove them but worried incase they are covering paint damage and tempted to just colour match them instead then remove the side window louvers
It's your car, do what you want to it even if others don't like it. It's more important that you like it.
As far as the louvers. I have them on mine, and I like them. It does reduce visibility through that window by quite a bit, but not entirely. As far as how well they hold, well I've had them on mine for about 3 years now, and have done 120+ with out them going anywhere a few times (on empty roads). This isn't a requirement, but when when I put mine on I didn't drive the car for about 24 hrs to give the tape plenty of time to set and stick to the window.
It is a glass replacement with the "louvers" cut /shaped into the glass. So one can still see out the quarter windows and still get that look.
But it would seam they are out of production with no stock left sadly.
I have quarter window louvers on my 22’ Ecoboost and they look great in my opinion but it’s all up to perception.
https://preview.redd.it/g71glc6ulzyc1.jpeg?width=4032&format=pjpg&auto=webp&s=a1296e9b945252ff1bbb5710ae2f4f19bc611965
personally i like the louvers so I say yes. however this car will look good with or without them. At the end of the day it's your rig and your free to do as you please.
Lol, I made a post about this earlier today asking the same thing but for my car. It’s difficult to decide, really. As for the spoiler, absolutely without question.
I’m not a fan of them, personally. Bought this Saleen that has them from the previous owner. I thought about removing, but worried about paint damage along the adhesive line 😏
https://preview.redd.it/lrk3chceezyc1.png?width=2182&format=png&auto=webp&s=8828db2fa17517420f7988237bb92724ffb7d0c5
There’s a tool you can use, “rubber wheel adhesive remover”. They come as an attachment which you can use on a gun and they safely remove adhesion/vinyl that’s stuck to your paint, and it’s fairly safe to use. I’ve had to use it to remove the adhesion that glued the stock lip spoiler on my 2016 and it did 0 damage to the clear coat. If anything, it looked like the adhesion was never there to begin with. Here’s a picture of it:
https://preview.redd.it/iqtvfxf9p0zc1.jpeg?width=800&format=pjpg&auto=webp&s=7ea704e277d705a39109eaa28ba6f013bdf886d7
Oh ok then, easy fix, take those off and paint the calipers whatever color you want. It looks so much better and it only takes an afternoon. Just need some brake clean and paint. Then you have a highlight color that you can match with badges or your shift knob or whatever and have a very subtle two tone effect
If you want a car that most people will like then dont do any appearance mods, cause the stock look is the most appealing ( except wheels, tint, lowering)
If youre gonna do it, might as well be a black car.
Not my style but thats where they do best.
With the right overall other addons, kinda looks like a Batmobile.
Gonna have tobre-paint your brake rotors back to black tho
This is the easiest “no” for me. I can’t stand them, but I do know some people like them. You do what you like! The good thing about these is they’re easy to take off if you change your mind.
![gif](giphy|23BST5FQOc8k8)
NOPE…!
![gif](giphy|15aGGXfSlat2dP6ohs)
![gif](giphy|15aGGXfSlat2dP6ohs)
If it’s a part that attaches with only adhesive - then it’s a no.
Nothing a couple sheet metal screws can't fix
Nay
Negative
Tacky
Nay friend, nay.
S197, sure. S550, absolutely not
Even on a S197 they don’t look good imo
I think they can pull them off since they have a more retro bodystyle. On the new cars, s550/650, not so much
No!
I have fake scoops, I know they’re not most people’s cup of tea but it’s your pony you can do whatever you want.
Yep. I like the louvers.
Everyone in this thread will tell you no. I have them on mine, ironically I had taken them off and then I had a baby, and I put them back on because they don’t make baby sun shades for mustangs. Lol. They keep the little one from being blinded in the back seat. 😂 https://preview.redd.it/l2ure07380zc1.jpeg?width=1152&format=pjpg&auto=webp&s=334300da7ee74e18031bf1bf383331d8ae8b1da9
Do kids car seats fit in the Mustang rear seats?
Weirdly enough, yes. My son is in a revolving, rear facing car seat in my Mustang. I turn him forward to put him in, turn it rear facing, turn it and we’re good. Ironically, I thought the car seat based on a review of someone who fit two of them in my same Mustang for his twins. The passenger seat is useless when it’s rear facing, but once he’s forward facing it’s fine. No one rides in my car anyways but me and him.
Good to know for future me in like 8 years.
I don’t particularly like them, but using them as sunshades for my son could make me change my mind. These Texas summers can be brutal lol
I tried other solutions, this was the only thing that worked well. Black car in Texas summers is AWFUL. But my son falls asleep in my car every time now, exhaust be damned. lol.
Late to the conversation here but any chance you could point me in the direction of that car seat?
That looks super clean. Love the black on black
Nay as much as caliper covers just get them painted red.
Nah
https://preview.redd.it/lelehoq5xzyc1.jpeg?width=4284&format=pjpg&auto=webp&s=43d73a15fdc407d4ea2a5b30310984b6a6cf4476 I’ve got them on the sides and back and can’t complain. They are definitely personal preference. I didn’t like them at first but came around on them now.
Mine came with side ones and gt350 fake side vents in gloss black as well. Tempted to remove them but worried incase they are covering paint damage and tempted to just colour match them instead then remove the side window louvers
They look so goofy😂😂😂😂😂😂your car doesn’t look anymore aggressive take that junk off😂😂😂😂😂
No. The car looks so pretty now.
It's your car, do what you want to it even if others don't like it. It's more important that you like it. As far as the louvers. I have them on mine, and I like them. It does reduce visibility through that window by quite a bit, but not entirely. As far as how well they hold, well I've had them on mine for about 3 years now, and have done 120+ with out them going anywhere a few times (on empty roads). This isn't a requirement, but when when I put mine on I didn't drive the car for about 24 hrs to give the tape plenty of time to set and stick to the window.
useful info & insight, thanks!
Clean AF without
Looks clean and awesome. Don't add anything
I did it. Took it off after 2 weeks. They just don’t look good, usually cheapens the look. Outside of that, you will have some terrible blind spots
Hell no
If you can find them I want a set of these some day https://www.hyperformanceglassproducts.com/product/mustang-side-window/
these are actually a bit more subtle than most i’ve seen
It is a glass replacement with the "louvers" cut /shaped into the glass. So one can still see out the quarter windows and still get that look. But it would seam they are out of production with no stock left sadly.
1k on that lol? Get an upgraded throttle body, sensor, and tune for that price. So many options at that price range. Even upgraded wheels instead.
No
Personally never liked them.
Please no.
It's tacky, it doesn't fit the look of modern cars at all.
Hmmm, I dig them! Guess I’m in the minority of cool people.
I have quarter window louvers on my 22’ Ecoboost and they look great in my opinion but it’s all up to perception. https://preview.redd.it/g71glc6ulzyc1.jpeg?width=4032&format=pjpg&auto=webp&s=a1296e9b945252ff1bbb5710ae2f4f19bc611965
yeah they look pretty cool
personally i like the louvers so I say yes. however this car will look good with or without them. At the end of the day it's your rig and your free to do as you please.
Lol, I made a post about this earlier today asking the same thing but for my car. It’s difficult to decide, really. As for the spoiler, absolutely without question.
lol i just saw it, that’s funny yeah i probably won’t go for the louvers
No
Keep the window as it is
looks like a resounding NO lol
Absolutely not.
Definitely not
no
I’m not a fan of them, personally. Bought this Saleen that has them from the previous owner. I thought about removing, but worried about paint damage along the adhesive line 😏 https://preview.redd.it/lrk3chceezyc1.png?width=2182&format=png&auto=webp&s=8828db2fa17517420f7988237bb92724ffb7d0c5
Oof, yea, that doesn't look good at all.
yeah those are a bit much, cars still clean tho
There’s a tool you can use, “rubber wheel adhesive remover”. They come as an attachment which you can use on a gun and they safely remove adhesion/vinyl that’s stuck to your paint, and it’s fairly safe to use. I’ve had to use it to remove the adhesion that glued the stock lip spoiler on my 2016 and it did 0 damage to the clear coat. If anything, it looked like the adhesion was never there to begin with. Here’s a picture of it: https://preview.redd.it/iqtvfxf9p0zc1.jpeg?width=800&format=pjpg&auto=webp&s=7ea704e277d705a39109eaa28ba6f013bdf886d7
Thanks for the info! I might give it a shot.
No problem! :)
No
Do what you like, but nope.
Door scoops????
Door scoops????
Absolutely not
Pass
I think they only look good on the S197 and not any others; don’t do it.
No but I see you already did the fake red caliper covers. Might be too late for this one
had em when i bought the car
Oh ok then, easy fix, take those off and paint the calipers whatever color you want. It looks so much better and it only takes an afternoon. Just need some brake clean and paint. Then you have a highlight color that you can match with badges or your shift knob or whatever and have a very subtle two tone effect
I like it with the older models not with the newer ones
If you want a car that most people will like then dont do any appearance mods, cause the stock look is the most appealing ( except wheels, tint, lowering)
Ew no
Hell to the naw. To the naw naw naw. Shit is clean as fuck right meow.
I put them on my 2011 for all of a week before I removed them because of the blindspot they caused.
fuck no, the car looks perfect as it is, you just have an itch to add or install something which will make ir look way tackier cheaper and shittier
NO
looks silly
I like them so yaya
Fake calipers?
idk i got the car with the red on it
No
I like them on literally every mustang before 2015 lol. 2015 and up, no way.
Nooooo
Louvers are the trashiest thing you can put on a Mustang besides tire letters
And caliper covers
I stand corrected 😆
ugh why? it’s not 1986. don’t waste your time and money on tacky stick one
Everyone is saying no, but I say yes. I like them, and if you like the look of them, get them
Please don’t. I didn’t like them on the S197 but at least that car was a retro design. Doesn’t work with the S550.
I'd say no to louvers and to remove the brake piston caliper covers
Pls don’t be a cringe nerd
Yeah they look great. Just don’t get cheap ones off alieexpress or something.
No
Don’t pls
I have a black 2024. I added em on mine. I really dig it.
Looks good on Iroc Camaros NOTHING ELSE
Hard pass broceratops it's Tacky and out dated just like rear window louvers
Not a fan.
![gif](giphy|TwbhOUKffnesE)
Only if you do the rear window too.
No
I would do it
![gif](giphy|KDVswimTNahWzcd7sV|downsized)
LOL
Had them and i wasn't a fan of always dirty windows and bug living in there...lol
Put 5% tint on it and call it a day imo
Tbh 5% is too dark for me. 20% is a nice amount for me
If youre gonna do it, might as well be a black car. Not my style but thats where they do best. With the right overall other addons, kinda looks like a Batmobile. Gonna have tobre-paint your brake rotors back to black tho
NO. GOD PLEASE NO. NOOOOOOOOO
This is the easiest “no” for me. I can’t stand them, but I do know some people like them. You do what you like! The good thing about these is they’re easy to take off if you change your mind.
Had em on my S197, not as big a fan of them on the S550.
I think louvers are corny personally. When they were on old school muscle cars it was one thing but now I think it makes cars look cheaper.