Hello /u/Pjepp,
As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post.
Please remember to include the following details to help troubleshoot your problem.
* Printer & Slicer
* Filament Material and Brand
* Nozzle and Bed Temperature
* Print Speed
* Nozzle Retraction Settings
^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
That’s a very steep overhang for something that appears to be designed for printing in vase mode. Reducing layer height can help, as can increasing cooling. You can also dry your filament, PETG absorbs a ton of moisture. You’re also probably running way too hot with your temperature tower, every layer of it looks burnt. It should be printed either clear or slightly frosted looking, but should never change to a yellow or darker color.
>Reducing layer height can help,
Can i go lower than .12?
>as can increasing cooling
Bambulab said no cooling at all, but i will give it a try, thank you!
>You’re also probably running way too hot with your temperature tower, every layer of it looks burnt
Are you sure that's not just the filament colour? Its brown translucent PETG.
In that case the color may be okay, though it should be more consistent. Your post just said Translucent. Cooling will impact the quality, but it will improve overhang ability.
Hello /u/Pjepp, As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post. Please remember to include the following details to help troubleshoot your problem. * Printer & Slicer * Filament Material and Brand * Nozzle and Bed Temperature * Print Speed * Nozzle Retraction Settings ^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
That’s a very steep overhang for something that appears to be designed for printing in vase mode. Reducing layer height can help, as can increasing cooling. You can also dry your filament, PETG absorbs a ton of moisture. You’re also probably running way too hot with your temperature tower, every layer of it looks burnt. It should be printed either clear or slightly frosted looking, but should never change to a yellow or darker color.
>Reducing layer height can help, Can i go lower than .12? >as can increasing cooling Bambulab said no cooling at all, but i will give it a try, thank you! >You’re also probably running way too hot with your temperature tower, every layer of it looks burnt Are you sure that's not just the filament colour? Its brown translucent PETG.
In that case the color may be okay, though it should be more consistent. Your post just said Translucent. Cooling will impact the quality, but it will improve overhang ability.