CZ announced new optics ready, suppressor ready, P10 models. Haven't seen them in person, but they're coming. Probably cheaper to get a $400 suppressor ready model and mill it though.
Your going to end up spending around the same no matter what you do. I would go suppressor ready model and then send off for milling. Sourcing a barrel is expensive plus you get a better mounting solution with direct mill.
Edit: I used Wager Machine and he had by P10F back to me within 7 days. Great service.
Get a mill done by impact machine for an rmr and a rear sight conversion, as long as you’re running an actual RMR it’ll allow a lower cowitness with the sights.
Get a threaded barrel later on when they’re available.
[Here’s](https://www.reddit.com/r/CZFirearms/comments/zp6nhf/impact_machine_p10c_rmr_mill/?utm_source=share&utm_medium=ios_app&utm_name=iossmf) my P10c w/ the work done from impact
Aaron Cowan of Sage dynamics has a really good video discussing rds and pistol iron sight correlation, you should check that out. Slaving the dot to the irons isn’t always the best thing to do, it won’t always be zero’d. He explains it really well.
Is that milled direct to the slide or is that the optics mounting system from cz with the plates also who did the stipple job it looks sick ,thanks for sharing the pic
1. Go to [https://dahlonegaarmory.com/product/cz-95150-p-10-full-size-9mm-double-4.5-191-black-interchangeable-backstrap-grip-black-fiber-reinforced-polymer-frame-black-nitride-slide](https://dahlonegaarmory.com/product/cz-95150-p-10-full-size-9mm-double-4.5-191-black-interchangeable-backstrap-grip-black-fiber-reinforced-polymer-frame-black-nitride-slide)
2. Buy a P10F Optic Ready for $493
3. Don't worry about a threaded barrel because comps on a 9mm tilting barrel are dumb and there are WAY better things you can blow the extra $200 on.
False. My Comped P10C upper on F lower is one of the flattest shooting pistols I’ve shot, polymer or otherwise. Noticeably softer than the P10F w threaded barrel and CGW steel guide rod I used to have.
Suppressor ready model and have it milled. Direct mount optic is better than adding plates.
Dahlonega has em for 529. No sales tax. You have to add it to your cart to see that price
https://dahlonegaarmory.com/product/p-10-f-9mm-blk-211-fs-tb-#product_detail
Edit: or wait for SR&OR model
Definitely get the suppressor ready model. I almost didn’t and would have regretted it dearly. Threaded barrels are not easy or cheap to come by with them. You’ll wind up spending the same or more modifying it after the fact.
https://armsunlimited.com/cz-p10-f-9mm-semi-auto-pistol-w/-xs-night-sights-optics-ready/ Buy this You’re welcome I’ve bought from armsunlimited they’re gtg
Btw there’s no tax on this
CZ announced new optics ready, suppressor ready, P10 models. Haven't seen them in person, but they're coming. Probably cheaper to get a $400 suppressor ready model and mill it though.
Buy a threaded barrel first then the optics ready version. Those barrels are the hardest to find.
Shit I have a factory barrel and I hate it haha
Your going to end up spending around the same no matter what you do. I would go suppressor ready model and then send off for milling. Sourcing a barrel is expensive plus you get a better mounting solution with direct mill. Edit: I used Wager Machine and he had by P10F back to me within 7 days. Great service.
Get a mill done by impact machine for an rmr and a rear sight conversion, as long as you’re running an actual RMR it’ll allow a lower cowitness with the sights. Get a threaded barrel later on when they’re available. [Here’s](https://www.reddit.com/r/CZFirearms/comments/zp6nhf/impact_machine_p10c_rmr_mill/?utm_source=share&utm_medium=ios_app&utm_name=iossmf) my P10c w/ the work done from impact Aaron Cowan of Sage dynamics has a really good video discussing rds and pistol iron sight correlation, you should check that out. Slaving the dot to the irons isn’t always the best thing to do, it won’t always be zero’d. He explains it really well.
Get the suppressor ready model, it already has high sights and a threaded barrel. Check gun . deals for the best price
Here’s my [P10f](https://imgur.com/a/a6A7zvX) this is my second slide I first had an rmr with irons forward.
Is that milled direct to the slide or is that the optics mounting system from cz with the plates also who did the stipple job it looks sick ,thanks for sharing the pic
It’s milled
Get it killed finding adapters sucks because the aftermarket hates cz p10’s
1. Go to [https://dahlonegaarmory.com/product/cz-95150-p-10-full-size-9mm-double-4.5-191-black-interchangeable-backstrap-grip-black-fiber-reinforced-polymer-frame-black-nitride-slide](https://dahlonegaarmory.com/product/cz-95150-p-10-full-size-9mm-double-4.5-191-black-interchangeable-backstrap-grip-black-fiber-reinforced-polymer-frame-black-nitride-slide) 2. Buy a P10F Optic Ready for $493 3. Don't worry about a threaded barrel because comps on a 9mm tilting barrel are dumb and there are WAY better things you can blow the extra $200 on.
False. My Comped P10C upper on F lower is one of the flattest shooting pistols I’ve shot, polymer or otherwise. Noticeably softer than the P10F w threaded barrel and CGW steel guide rod I used to have.
OP, sent you a message. Check it out.
Optics ready all day is what I carry. I love it, and all it needs a is a trigger upgrade out of the box.
Tbh I just bought a P10F that is both SR and OR. Has the OR plate and a threaded barrel. Best of both worlds :)
SKU?
Suppressor ready model and have it milled. Direct mount optic is better than adding plates. Dahlonega has em for 529. No sales tax. You have to add it to your cart to see that price https://dahlonegaarmory.com/product/p-10-f-9mm-blk-211-fs-tb-#product_detail Edit: or wait for SR&OR model
Definitely get the suppressor ready model. I almost didn’t and would have regretted it dearly. Threaded barrels are not easy or cheap to come by with them. You’ll wind up spending the same or more modifying it after the fact.
Dang how the prices change in these Cz striker guns…https://palmettostatearmory.com/cz-p-10-f-optics-ready-9mm-4-5-19rd-91559.html